Dr

Invotec Solutions Limited launch the new Dr Eddy flow meter designed to display not only water flow but 'Turbulent flow'. Using FCI ( Fluid Characteristic Indication) Technology, Dr. Eddy displays the condition of the cooling water as it relates to flow efficiency: laminar flow, transient flow, or turbulent flow.

Dr Eddy will allow users to view and monitor the main stages of water flow to achieve turbulent flow - the most efficient level of flow within pipes and cooling channels - ensuring cooling water is not wasted due to excessive flow. The correct level of flow used is particularly important during the cooling phase of a moulding cycle.

Dr Eddy can help you to reduce waste water and electrical usage during every cycle of your production run.

Paul Horner of Invotec Solutions says ''Our own research shows that many customers are unaware that a 10mm cooling channel or pipe will typically need only 1.5 to litres per minute to achieve Turbulent flow; any more is a waste of energy by pumping more water through the cooling system than is necessary. Correcting this one aspect can lead to big energy savings''.

The same FCI technology can also be found in the Smartflow range of Digital flow meters.

Invotec Solutions Limited is the master distribution point for all Smartflow sales within the European Union, more information from Invotec Solution direct or through one of their 15 European distributors.

Website: www.invotecsolutions.co.uk/dreddy小儿便秘用什么药
鼻塞咳嗽流鼻涕怎么办
江门牛皮癣专科医院